Newtonian Mechanics - AP Physics 1
Card 0 of 4456
If the velocity of an objects is halved, what is the resulting change in the kinetic energy?
If the velocity of an objects is halved, what is the resulting change in the kinetic energy?
Tap to see back →
The equation for kinetic energy is:
, where 
is the velocity of the object. Therefore, if we halve the velocity, we can substitute that into our equation, and see what will change in the kinetic energy equation:
Thus, the kinetic energy is quartered.
The equation for kinetic energy is:
Thus, the kinetic energy is quartered.
A box is placed on a 30o frictionless incline. What is the acceleration of the box as it slides down the incline?
A box is placed on a 30o frictionless incline. What is the acceleration of the box as it slides down the incline?
Tap to see back →
To find the acceleration of the box traveling down the incline, the mass is not needed. Using the incline of the plane as the x-direction, we can see that there is no movement in the y-direction; therefore, we can use Newton's second, F = ma, in the x-direction.
There is only one force in the x-direction (gravity), however gravity is not just equal to “mg” in this case. Since the box is on an incline, the gravitational force will be equal to mgsin(30o). Substituting force into F =ma we find that mgsin(30o) = ma. We can now cancel out masses and solve for acceleration.
To find the acceleration of the box traveling down the incline, the mass is not needed. Using the incline of the plane as the x-direction, we can see that there is no movement in the y-direction; therefore, we can use Newton's second, F = ma, in the x-direction.
There is only one force in the x-direction (gravity), however gravity is not just equal to “mg” in this case. Since the box is on an incline, the gravitational force will be equal to mgsin(30o). Substituting force into F =ma we find that mgsin(30o) = ma. We can now cancel out masses and solve for acceleration.
A homogenous mass of 0.25kg is fixed to a 0.5kg Hookean spring. When the mass/spring system is stretched 1cm from the equilibrium, it takes 3N of force to hold the mass in place. If the displacement from equilibrium is doubled, the force necessary to keep the system in place will .
A homogenous mass of 0.25kg is fixed to a 0.5kg Hookean spring. When the mass/spring system is stretched 1cm from the equilibrium, it takes 3N of force to hold the mass in place. If the displacement from equilibrium is doubled, the force necessary to keep the system in place will .
Tap to see back →
Since the spring is Hookean, the relationship between the force and displacement from equilibrium of the mass can be expressed by Hooke's Law:
Since this equation is linear, the force and displacement are directly proportional. Thus, when the displacement doubles, the force doubles.
Since the spring is Hookean, the relationship between the force and displacement from equilibrium of the mass can be expressed by Hooke's Law:
Since this equation is linear, the force and displacement are directly proportional. Thus, when the displacement doubles, the force doubles.
A submarine launches a missile from underwater. The missile passes through the surface of the sea at a velocity of 
. At this point, a thruster ignites, causing the missile to accelerate in a straight line at 
. After 10 seconds of acceleration, how far has the missile traveled?
A submarine launches a missile from underwater. The missile passes through the surface of the sea at a velocity of
Tap to see back →
We need our kinematic equation that relates displacement, initial velocity, and acceleration:
We can neglect gravity in this problem since the statement says that the missile accelerates in a straight line at a constant rate.
Plugging in our values, we get:
We need our kinematic equation that relates displacement, initial velocity, and acceleration:
We can neglect gravity in this problem since the statement says that the missile accelerates in a straight line at a constant rate.
Plugging in our values, we get:
A cannon is packed with gunpowder and a ball of mass 10kg. The cannon is angled at 30 degrees. When fired, the gunpowder releases 500J of energy, which is all transferred to the cannon ball. Neglecting air resistance and friction within the cannon, how far does the ball travel before hitting the ground?
Assume 
A cannon is packed with gunpowder and a ball of mass 10kg. The cannon is angled at 30 degrees. When fired, the gunpowder releases 500J of energy, which is all transferred to the cannon ball. Neglecting air resistance and friction within the cannon, how far does the ball travel before hitting the ground?
Assume
Tap to see back →
There are two ways to solve this problem. The first and much easier way is to use the range equation. The second is using your kinematics equations.
Method 1: Range Equation
The range equation is the following:
We know everything ecvept for the initial velocity. However, we can calculate it knowing that the cannon transfers 500 J of energy to the ball. Therefore:
Rearranging for velocity:
Now we can plug everything into the range equation:
Method 2: Kinematics Equations
As in the first method, we can calculate the initial velocity of the ball:
Rearranging for velocity:
We can then split this into it's components:
We can use the y-component to calculate how long the ball is in the air. We can do one of two things:
- Calculate how long the ball takes to reach it's peak and then multiply by 2
- Calculate how lon gthe ball takes to get a velocity of -5
We'll go with method 2:
Rearranging for t:
Then we can multiply this time by the horizontal velocity (which stays constant because we are neglecting air resistance).
There are two ways to solve this problem. The first and much easier way is to use the range equation. The second is using your kinematics equations.
Method 1: Range Equation
The range equation is the following:
We know everything ecvept for the initial velocity. However, we can calculate it knowing that the cannon transfers 500 J of energy to the ball. Therefore:
Rearranging for velocity:
Now we can plug everything into the range equation:
Method 2: Kinematics Equations
As in the first method, we can calculate the initial velocity of the ball:
Rearranging for velocity:
We can then split this into it's components:
We can use the y-component to calculate how long the ball is in the air. We can do one of two things:
- Calculate how long the ball takes to reach it's peak and then multiply by 2
- Calculate how lon gthe ball takes to get a velocity of -5
We'll go with method 2:
Rearranging for t:
Then we can multiply this time by the horizontal velocity (which stays constant because we are neglecting air resistance).
A passenger jet is beginning its decent to its final destination. If it is at a height of 3,000m and traveling at a rate of 
, what should be its angle of decent to arrive in 10 minutes?
A passenger jet is beginning its decent to its final destination. If it is at a height of 3,000m and traveling at a rate of
Tap to see back →
We know that the plane needs to drop 3,000 meters in 10 minutes. Therefore, we can calculate the vertical velocity that the plane needs to be traveling at:
Knowing the plane's velocity, we can caluclate what angle at which it needs to decend to achieve this vertical velocity:
Rearranging for theta:
Plugging in our values:
We know that the plane needs to drop 3,000 meters in 10 minutes. Therefore, we can calculate the vertical velocity that the plane needs to be traveling at:
Knowing the plane's velocity, we can caluclate what angle at which it needs to decend to achieve this vertical velocity:
Rearranging for theta:
Plugging in our values:
Upon ignition, a bottle rocket accelerates at a rate of 
for 
before it loses thrust. What is the bottle rocket's maxmimum height?
Neglect air resistance and assume 
Upon ignition, a bottle rocket accelerates at a rate of
Neglect air resistance and assume
Tap to see back →
We can use our kinematics equations to determine the height of the rocket the moment it loses thrust:
If we clarify the initial state being the moment the rocket loses thrust and the final state being the point of its maximum height, we can use the expression for conservation of energy to calculate the final height:
Removing final kinetic energy (which will be zero) and substituting in our expressions for each variable:
Cancel out mass and rearrange for final height:
From the problem statement, we can determine the initial velocity:
Now that we have values for all of our variables, we can solve:
We can use our kinematics equations to determine the height of the rocket the moment it loses thrust:
If we clarify the initial state being the moment the rocket loses thrust and the final state being the point of its maximum height, we can use the expression for conservation of energy to calculate the final height:
Removing final kinetic energy (which will be zero) and substituting in our expressions for each variable:
Cancel out mass and rearrange for final height:
From the problem statement, we can determine the initial velocity:
Now that we have values for all of our variables, we can solve:
Using the coordinate system in the graph shown, what is Boomer 's displacement between 
?
Using the coordinate system in the graph shown, what is Boomer 's displacement between
Tap to see back →
Displacement has magnitude and direction. It is found by subtracting the position at time zero from the position at time ten seconds.
Displacement has magnitude and direction. It is found by subtracting the position at time zero from the position at time ten seconds.
Consider the following system:
If 
and 
, what is the acceleration of the block?
Consider the following system:
If
Tap to see back →
There are two forces in play in this scenario: friction and gravity. We can use Newton's second law to develop an expression for the acceleration of the block:
Substituting in expressions for each force, we get:
Canceling out mass and rearranging for acceleration, we get:
We know all of our values, allowing us to solve for the acceleration:
There are two forces in play in this scenario: friction and gravity. We can use Newton's second law to develop an expression for the acceleration of the block:
Substituting in expressions for each force, we get:
Canceling out mass and rearranging for acceleration, we get:
We know all of our values, allowing us to solve for the acceleration:
A young boy is aiming a slingshot straight upward. If the sling shot applies 
of work to a ball with mass 
, how high does the ball travel?
A young boy is aiming a slingshot straight upward. If the sling shot applies
Tap to see back →
We can use the equation for conservation of energy to solve this problem:
If we assume the initial state is when the slingshot is fully loaded and the final state is at the ball's maxmium height, we can completely eliminate kinetic energy to get:
Substituting in our value for initital potential energy and an expression for final potential energy, we get:
Rearranging for final height we get:
We can use the equation for conservation of energy to solve this problem:
If we assume the initial state is when the slingshot is fully loaded and the final state is at the ball's maxmium height, we can completely eliminate kinetic energy to get:
Substituting in our value for initital potential energy and an expression for final potential energy, we get:
Rearranging for final height we get:
An object is moving to the right and is speeding up. Which of the following is false?
An object is moving to the right and is speeding up. Which of the following is false?
Tap to see back →
If an object is moving to the right, then its displacement is positive. If its displacement is positive then its velocity must be positive as well. The object is speeding up. This implies that the magnitude of its velocity is increasing. If this is true we have that the velocity of the object, 
, after some time, 
, has passed must be a larger positive velocity than say, 
, the object's velocity before that time passed. Therefore, the object's average acceleration is given by:
since 
So we have that the object's acceleration is positive. If the object's acceleration is positive, then there must be a positive net force causing the acceleration, due to Newton's first law: 
. Therefore, it is false that the object experiences a net force of 0N.
If an object is moving to the right, then its displacement is positive. If its displacement is positive then its velocity must be positive as well. The object is speeding up. This implies that the magnitude of its velocity is increasing. If this is true we have that the velocity of the object,
So we have that the object's acceleration is positive. If the object's acceleration is positive, then there must be a positive net force causing the acceleration, due to Newton's first law:
An object slides across the floor moving to the left. After some time it comes to a stop. Which of the following is false?
An object slides across the floor moving to the left. After some time it comes to a stop. Which of the following is false?
Tap to see back →
If the object is moving to the left, then its displacement must be negative since its final position will be further to the left in than its initial position. So in an imaginary number line, after some time passes, the object's final position is less than the object's initial position. This can be shown mathematically:
, since 
Since the object's displacement is negative, then so is its velocity. This can easily be seen from the equation for average velocity:
since 
. At the end of its trajectory, the object stops, so overall the object's velocity is less than or equal to 
.
The object eventually stops. This means that the magnitude of the object's velocity is decreasing. In other words, the absolute value of the object's velocity is becoming smaller and smaller until it stops. So, for example, if at some moment the object's velocity is 
, after some time its velocity will be 
. Remember that the negative sign indicates only the direction of the vector (the object is moving to the left, hence its velocity is negative). But in absolute terms, the object is moving slower and slower (to the left) until it stops. Finally, we can see that the acceleration must be positive in order to slow down an object moving to the left. Going of our example, let's say the object is moving at 
and after some time it slows down to 
(again the negative sign just indicates that the object moves to the left). So, if look at the average acceleration we have:
Thus the acceleration must be positive.
If the object is moving to the left, then its displacement must be negative since its final position will be further to the left in than its initial position. So in an imaginary number line, after some time passes, the object's final position is less than the object's initial position. This can be shown mathematically:
Since the object's displacement is negative, then so is its velocity. This can easily be seen from the equation for average velocity:
The object eventually stops. This means that the magnitude of the object's velocity is decreasing. In other words, the absolute value of the object's velocity is becoming smaller and smaller until it stops. So, for example, if at some moment the object's velocity is
Thus the acceleration must be positive.
Two sumo wrestlers are in a match. At the start of the match, they both lunge at each other. They hit and miraculously come to a stand still. One wrestler was 200kg and traveling at a velocity of 
at the instance of collision. If the other wrestler was traveling at 
, what is his mass?
Two sumo wrestlers are in a match. At the start of the match, they both lunge at each other. They hit and miraculously come to a stand still. One wrestler was 200kg and traveling at a velocity of
Tap to see back →
It does not matter whether the collision is elastic or inelastic (although it would be best to assume that it's inelastic). Momentum is conserved in either type of collision, and is the only value needed for our calculation. Since they come to a standstill, their momentums at the moment of collision are equal and opposite:
Rearrange to solve for 
:
Plug in the given values from the question and solve:
It does not matter whether the collision is elastic or inelastic (although it would be best to assume that it's inelastic). Momentum is conserved in either type of collision, and is the only value needed for our calculation. Since they come to a standstill, their momentums at the moment of collision are equal and opposite:
Rearrange to solve for
Plug in the given values from the question and solve:
Which of the following statements is false regarding the relationship between an object's velocity and acceleration?
Which of the following statements is false regarding the relationship between an object's velocity and acceleration?
Tap to see back →
By definition, acceleration is the rate of change of velocity with respect to time. The average acceleration of an object is given by:
Therefore, if velocity is constant it must be the case that acceleration is 0, since the initial and final velocities of the object are equal. Similarly, if acceleration is non-zero, then it must be the case that the initial and final velocities of the object are different (so velocity is changing). Now, when an object's acceleration and initial-velocity have the same sign (i.e. the same direction) then the object will speed up. In other words, the absolute value of its velocity (the magnitude) increases. This is easy to see if we solve for the final velocity in our equation:
If both 
and 
have the same sign, then the absolute value of 
will be greater as time passes, meaning the object is speeding up. (Try plugging in some numbers). Similarly, when 
and 
have opposite signs, the magnitude of the object's velocity must start to decrease. After enough time it might even come to a stop, and if it continues to experience the acceleration it will change direction and start gaining velocity on the opposite direction. Regardless, it must first slow down (think about when you throw an object on the air).
Example: 
Example: 
Remember that the positive and negative signs indicate the direction of the vectors. So when it comes to slowing down or speeding up, we want to look at the magnitude of the velocity. Therefore, the only statement that is false is the one that says that if an object has both negative initial velocity and acceleration it will slow down. The object will speed up and continue to move to the left.
By definition, acceleration is the rate of change of velocity with respect to time. The average acceleration of an object is given by:
Therefore, if velocity is constant it must be the case that acceleration is 0, since the initial and final velocities of the object are equal. Similarly, if acceleration is non-zero, then it must be the case that the initial and final velocities of the object are different (so velocity is changing). Now, when an object's acceleration and initial-velocity have the same sign (i.e. the same direction) then the object will speed up. In other words, the absolute value of its velocity (the magnitude) increases. This is easy to see if we solve for the final velocity in our equation:
If both
Example:
Example:
Remember that the positive and negative signs indicate the direction of the vectors. So when it comes to slowing down or speeding up, we want to look at the magnitude of the velocity. Therefore, the only statement that is false is the one that says that if an object has both negative initial velocity and acceleration it will slow down. The object will speed up and continue to move to the left.
Consider three distance vs. time plots. The first displays a horizontal line at 
, the second is linear with a positive slope, and the third increases quadratically. In which graph(s) do the net force acting upon it/them equal 0?
Consider three distance vs. time plots. The first displays a horizontal line at
Tap to see back →
The slope of a distance vs. time plot represents the object's velocity. Therefore, in both the first and second graphs, the velocity is constant and zero, respectively. An object with constant (or no) velocity is experiencing, by definition, no net force. Oppositely, in the third graph the slope is increasing, meaning the object is accelerating, meaning it must be subject to some force.
The slope of a distance vs. time plot represents the object's velocity. Therefore, in both the first and second graphs, the velocity is constant and zero, respectively. An object with constant (or no) velocity is experiencing, by definition, no net force. Oppositely, in the third graph the slope is increasing, meaning the object is accelerating, meaning it must be subject to some force.
Consider the Atwood Machine above. If the mass of the sphere (
) is 
and the mass of the cube (
) is 
, when the cube is let to fall, what would the system's acceleration be?
Consider the Atwood Machine above. If the mass of the sphere (
Tap to see back →
The net force experienced by m1 can be characterized as:
where T is the tension force along the string and mg is gravity.
because 
is also equivalent to 
, we can express this equation as
.
The net force experienced by m2 can similarly be expressed as:
and 
so 
From this point the problem is a system of equations.
If we solve for T in the first equation, we end up with 
.
Then we can plug into the second equation like so:
then:
finally we can isolate a:
when we plug in the masses given by the problem, we get:
The net force experienced by m1 can be characterized as:
because
The net force experienced by m2 can similarly be expressed as:
From this point the problem is a system of equations.
If we solve for T in the first equation, we end up with
Then we can plug into the second equation like so:
then:
finally we can isolate a:
when we plug in the masses given by the problem, we get:
A sports car can accelerate from 
to 
in 2s. How far does the sports car travel during the 2s of acceleration?
A sports car can accelerate from
Tap to see back →
The basic kinematics equation for motion under constant acceleration is:
We do not have the acceleration, but we can find it:
Apply this to the first equation and solve.
The basic kinematics equation for motion under constant acceleration is:
We do not have the acceleration, but we can find it:
Apply this to the first equation and solve.
A walker is walking at a constant rate of 
on a circular track that is 400m in length. A runner is also on the track going in the same direction as the walker, running at an unknown constant speed. The runner and the walker are together, then meet each other again when the walker has completed 
of a lap, or 200m. What is the runner's speed?
A walker is walking at a constant rate of
Tap to see back →
The equation for speed is:
The runner has gone around the track 1.5 times, thus his total distance traveled is:
We can find the elapsed time from the walker: Rearrange the speed equation to find time:
Now we have all the information we need to find the runner's speed:
The equation for speed is:
The runner has gone around the track 1.5 times, thus his total distance traveled is:
We can find the elapsed time from the walker: Rearrange the speed equation to find time:
Now we have all the information we need to find the runner's speed:
A police officer sees a car in a 
zone approaching a stop sign. The driver doesn't see the sign until the last minute and then slams on his breaks, decelerating at a constant rate to a stop just before the sign, but leaves a skid mark 
long. Reviewing the dash-cam tape, the officer is able to tell that the car took 
to stop. Was the driver speeding? Assume the wheels locked when the brakes were applied.
A police officer sees a car in a
Tap to see back →
To find how fast the driver was going before applying the brakes, we use the following kinematics formula since acceleration is constant:
Where 
is the displacement, 
is the initial velocity (before applying the brakes), 
is the final velocity (which is zero since the car came to a stop), and 
is time. We can now plug in the known values into the above equation and solve for the initial velocity:
In order to know if the driver was speeding, we must convert this speed and/or the speed limit in the same units. Let's put this speed in kilometers per hour.
As we can see, the driver was exceeding the 
speed limit and was thus speeding.
To find how fast the driver was going before applying the brakes, we use the following kinematics formula since acceleration is constant:
Where
In order to know if the driver was speeding, we must convert this speed and/or the speed limit in the same units. Let's put this speed in kilometers per hour.
As we can see, the driver was exceeding the
Imagine a decending elevator that is increasing it's speed. What is the direction of the acceleration of the elevator?
Imagine a decending elevator that is increasing it's speed. What is the direction of the acceleration of the elevator?
Tap to see back →
A trick that I often use is if something is speeding up, the acceleration and velocity point in the same direction. If something is slowing down. the acceleration and velocity point opposite directions. Since the elevator is speeding up, the acceleration must point in the same direction as it's velocity: downwards.
A trick that I often use is if something is speeding up, the acceleration and velocity point in the same direction. If something is slowing down. the acceleration and velocity point opposite directions. Since the elevator is speeding up, the acceleration must point in the same direction as it's velocity: downwards.