Call Now to Set Up Tutoring:

(888) 888-0446

College Chemistry : Acid-Base Reactions

Study concepts, example questions & explanations for College Chemistry

Create An Account

All College Chemistry Resources

1 Diagnostic Test 100 Practice Tests Question of the Day Flashcards Learn by Concept

Example Questions

Example Question #1 : Acid Base Reactions

Which of the following acid and base pairs are capable of acting as a buffer?

Possible Answers:

$H_{2}CO_{3}$ and $HCO_{3}^{-}$

$HNO_{3}$ and $NO_{3}^{-}$

$H_{2}SO_{4}$ and $HSO_{4}^{-}$

HCl and $Cl^{-}$

Correct answer:

$H_{2}CO_{3}$ and $HCO_{3}^{-}$

Explanation:

In this question, we're presented with a variety of acid/base pairs and we're asked to identify which one could act as a buffer.

Remember that a buffer is a pair of acid and its conjugate base that acts to resist substantial changes in pH. In order for a buffer to work, the acid base pair needs to exist in equilibrium. This way, when the pH of the solution changes, the equilibrium of the acid/base reaction will shift, such that the pH will not change drastically.

To have an acid/base pair in equilibrium, we'll need to look for a pair that contains a weak acid. Acids like HCl and $H_{2}SO_{4}$ are so strong that they will dissociate completely. Of the answer choices shown, only the carbonic acid/bicarbonate system ( $H_{2}CO_{3}$ and $HCO_{3}^{-}$ ) exists in equilibrium. Thus, this is the correct answer.

Report an Error

Example Question #2 : Acid Base Reactions

You are in chemistry lab performing a titration. You were given 15 mL of an aqueous solution with an unknown concentration of acetic acid, CH_3COOH to solve through titration with concentrated sodium hydroxide, NaOH . You know that the pKa of acetic acid is 4.75 and that your titrant is 0.1 M sodium hydroxide, NaOH .

The endpoint was determined at 10 mL of sodium hydroxide, NaOH . What is the pH after 5 mL of NaOH was added?

Possible Answers:

8.45

9.25

4.75

Correct answer:

4.75

Explanation:

At the half end point, the pH=pKa . This can be determined by the Henderson-Hasselbalch equation if it is not clear.

Since the endpoint of the titration is that there are 10 mL of 0.1 M NaOH added, that means that there are 0.001 moles of acetic acid.

When 5 mL of NaOH is added, there are 0.0005 moles of acetic acid and 0.0005 moles of acetate formed.

$pH = pKa + log \frac{base}{acid} = pKa + log \frac{0.0005}{0.0005 }$

log(1) = 1

Therefore pH= pKa

Report an Error

Example Question #1 : Acid Base Reactions

Determine which combination of solutions would create a buffer solution.

Possible Answers:

5 mL of 0.4 M NaOH + 10 mL of 0.2 M ammonium

10 mL of 0.4 M NaOH + 10 mL of 0.2 M ammonium

25 mL of 0.4 M NaOH + 50 mL of 0.2 M ammonium

50 mL of 0.4 M NaOH + 50 mL of 0.8 M ammonium

Correct answer:

50 mL of 0.4 M NaOH + 50 mL of 0.8 M ammonium

Explanation:

For all the other options there is no ammonium leftover with which to serve as the weak acid in the buffer system, the ammonium is all used up and converted to ammonia. However in the correct answer choice, there is enough ammonium leftover after the reaction with the sodium hydroxide.

Report an Error

Example Question #1 : Buffers

Determine the pH of an aqueous solution of 0.01 M acetic acid, $CH_{}3COOH$ . The pKa of acetic acid is 4.75.

Possible Answers:

0.161

3.45

2.87

Correct answer:

2.87

Explanation:

Since acetic acid is a weak acid, it has a Ka that is rather small, we have to do a RICE table to determine the equilibrium amount of hydronium, H₃O⁺ to then determine the pH.

R $CH_{}3COOH (aq) + H_{}2O (l) \rightarrow CH_{}3COO^{}- (aq) + H_{}3O^{}+ (aq)$

I 0.1 M - 0 0

C -x +x +x

E 0.1 -x x x

So first we need to change our pKa to a Ka

where $Ka = 10^{}-^{^{^{}}}pKa$ therefore

$Ka= 10^{}-^{}4^{}.^{}7^{}5 = 1.78 x 10^{}-^{}5$

= $\frac{[CH_{}3COO^{}-][H_{}3O^{}+]}{[CH_{}3COOH]}$ = $\frac{x*x}{(0.1-x)}$

If we assume that x is very small compared to 0.1...

$1.78x10^{}-5= \frac{x*x}{0.1}$

Where x = 0.00133

(note: when solving using the quadratic we come up with the same answer)

So if $x= 0.00133 = [H_{}3O^{}+]$

$pH = -log [H_{}3O^{}+] =-log(0.0013) = 2.87$

Report an Error

Example Question #1 : Acid Base Reactions

Determine which solution(s) will yield a buffer solution.

I. 10 mL of 0.5 M HCl + 20 mL of 0.5 M acetate

II. 10 mL of 0.5 M HCl + 10 mL of 0.5 M acetate

III. 10 mL of 0.5 M HCl + 10 mL of 1.0 M acetate

IV. 10 mL of 0.5 M HCl + 10 mL of 1.5 M acetate

Possible Answers:

I and III

I only

I, II, III, and IV

I, III, and IV

III and IV

Correct answer:

I, III, and IV

Explanation:

These answers are correct because the two components needed to create a buffer solution are a weak acid and its conjugate base, or a weak base and its conjugate acid. In these cases, the first reaction to occur upon addition of the strong acid is the formation of the conjugate acid, acetic acid.

$HCl + CH_3COO^- \rightarrow CH_3COOH$

If the amount of initial CH_3COO^- is greater than HCl, then we will have some left over to act as a buffer with the created conjugate acid. This can be through a greater volume, or through a higher concentration as shown in the correct answers.

Report an Error

Example Question #3 : Acid Base Reactions

Which combination(s) would create a buffer solution?

I. Weak acid

II. Weak acid's conjugate base

III. Strong acid

IV. Strong base

V. Weak base

VI. Weak base's conjugate acid

Possible Answers:

III and IV only

None of these will combine to form a buffer solution

I and II; III and IV; V and VI

I and II; V and VI

Correct answer:

I and II; V and VI

Explanation:

A buffer solution is formed from the equilibrium of a weak acid and its conjugate base, or from a weak base and its conjugate acid. It's ability to "buffer" the pH or keep it from changing in large amounts in from the switching between these two forms weak and its conjugate.

Report an Error

Example Question #4 : Acid Base Reactions

Determine which of these solution combinations form a buffer.

Possible Answers:

10 mL of 0.5 M NaOH + 10 mL of 0.5 M ammonia

10 mL of 0.5 M NaOH + 20 mL of 0.5 M ammonium

10 mL of 0.5 M NaOH + 10 mL of 0.5 M ammonium

10 mL of 0.5 M NaOH + 10 mL of 0.5 M HCl

Correct answer:

10 mL of 0.5 M NaOH + 20 mL of 0.5 M ammonium

Explanation:

First to go through why the other ones are wrong:

Strong base + strong acid neutralizes and does not form a buffer solution

Strong base + weak base does not form a buffer - would need an acid

Strong base + weak acid = all weak acid converted to conjugate base

The correct answer is:

Strong base + weak acid = half converted to conjugate base with half leftover as weak acid, with all the components for a buffer

Report an Error

Example Question #1 : Titrations

The titration of a $15.0\text{mL}$ sample of an $\text{HCl}$ solution at an unknown concentration requires $17.08\text{mL}$ of a $0.200\text{M NaOH}$ solution. What is the concentration of the unknown hydrochloric acid solution in ?

Possible Answers:

0.189

0.237

0.245

0.228

Correct answer:

0.228

Explanation:

Start by writing the chemical equation for this acid-base reaction.

$\text{HCl}(aq)+\text{NaOH}(aq)\rightarrow\text{H}_2\text{O}(l)+\text{NaCl}(aq)$

Next, find the number of moles of $\text{NaOH}$ that was added.

$17.08\text{mL NaOH}\cdot\frac{1\text{L}}{1000\text{mL}}\cdot\frac{0.200\text{ moles NaOH}}{\text{L}}=0.003416\text{ moles of NaOH}$

At the equivalence point of a titration, the moles of acid and the moles of base are the same.

$\text{Moles of HCl}=\text{Moles of NaOH}=0.003416$

Finally, find the molarity of the solution.

$\text{Molarity}=\frac{\text{moles of solute}}{\text{liters of solution}}=\frac{0.003416}{15.0\times10^{-3}}=0.228M$

Make sure to round the answer to three significant figures.

Report an Error

Example Question #2 : Titrations

A $75.0\text{mL}$ sample of 0.100M sodium hydroxide is titrated with 0.150M hydrochloric acid. Find the pH of the solution after adding $45.0\text{mL}$ of hydrochloric acid.

Possible Answers:

11.2

11.8

10.4

12.2

Correct answer:

11.8

Explanation:

Start by finding the initial number of moles of sodium hydroxide by using the given volume and molarity. Since sodium hydroxide is a strong base, it will dissociate completely into $\text{OH}^-$ .

$\text{Initial moles of NaOH}=\text{Initial moles of OH}^-=0.075\text{L}(\frac{0.100\text{ mol}}{\text{L}})=0.0075\text{ moles}$

Next, find the number of moles of the hydrochloric acid added by using the given volume and molarity. Since hydrochloric acid is a strong acid, all of the $\text{H}_3\text{O}^+$ will come from the acid.

$\text{Moles of HCl added}=\text{Moles of H}_3\text{O}^+=0.045\text{L}(\frac{0.150\text{ moles}}{\text{L}})=0.00675\text{ moles}$

Now, as the acid is added, it will neutralize some of the base as shown by the following equation:

$\text{OH}^-(aq)+\text{H}_3\text{O}^+(aq)\rightarrow 2\text{H}_2\text{O}(l)$

Since the reactants are found in a 1:1 ratio, subtract the number of moles of acid added from the number of initial moles of base to get the amount of remaining base.

$\text{Remaining moles of NaOH}=0.0075-0.00675=7.5\times10^{-4}\text{ moles of NaOH}$

Now, divide this number of moles by the total volume of the solution to find the concentration of the base.

$[\text{OH}]^-=\frac{7.5\times 10^{-4}\text{ moles}}{0.075\text{L}+0.045\text{L}}=0.00625\text{ M}$

Next, find the $\text{pOH}$ value.

$\text{pOH}=-\log(0.00625)=2.204$

Finally, find the $\text{pH}$ value.

$\text{pH}=14-\text{pOH}$

$\text{pH}=14-2.204=11.80$

Your answer should have significant figures.

$\text{pH}=11.8$

Report an Error

Example Question #1 : Titrations

Screen shot 2016 03 24 at 9.10.57 pm

Determine the volume in mL of HCl solution it would take to neutralize $35.0\ mL$ of a $0.0025\ M$ NaOH with a $0.012\ M$ HCl solution during a titration.

Possible Answers:

$131.0\ mL$

$23.0\ mL$

$24.0\ mL$

$72.0\ mL$

Correct answer:

$72.0\ mL$

Explanation:

Determine the moles of NaOH used:

$0.035\ L\times \frac{0.025\ moles}{L}=8.75\times10^{-4}\ moles\ NaOH$

At the equivalence point of the titration:

$moles\ of\ NaOH=moles\ of\ HCl=8.75\times10^{-4}\ moles$

Convert the moles of HCl to liters:

$\frac{L}{0.012\ moles}\times8.75\times10^{-4}\ moles=0.072\ L\ of HCl$

Convert the liters to milliliters:

$\frac{1\ mL}{10^{-3}L}\times0.072\ L=72.0\ mL\ HCl$

Report an Error

View Tutors

Cameo
Certified Tutor

University of Oklahoma Norman Campus, Bachelor of Science, Environmental Engineering.

View Tutors

Lauren
Certified Tutor

Ohio University-Eastern Campus, Bachelor in Arts, Early Childhood Education.

View Tutors

Jonathan
Certified Tutor

University of Maryland-Baltimore County, Bachelor of Science, Mathematics.

All College Chemistry Resources

1 Diagnostic Test 100 Practice Tests Question of the Day Flashcards Learn by Concept

Popular Subjects

Computer Science Tutors in San Francisco-Bay Area, ISEE Tutors in Washington DC, Algebra Tutors in San Diego, Biology Tutors in Dallas Fort Worth, GMAT Tutors in Los Angeles, Biology Tutors in Boston, Biology Tutors in Los Angeles, French Tutors in Washington DC, MCAT Tutors in Seattle, Biology Tutors in Chicago

Popular Courses & Classes

ISEE Courses & Classes in Phoenix, GRE Courses & Classes in New York City, ACT Courses & Classes in Atlanta, SAT Courses & Classes in Phoenix, GMAT Courses & Classes in San Diego, ISEE Courses & Classes in Washington DC, GRE Courses & Classes in Atlanta, SAT Courses & Classes in Denver, GRE Courses & Classes in Houston, MCAT Courses & Classes in Chicago

Popular Test Prep

GRE Test Prep in Boston, MCAT Test Prep in Phoenix, GRE Test Prep in New York City, SAT Test Prep in Atlanta, MCAT Test Prep in Philadelphia, ACT Test Prep in Atlanta, SAT Test Prep in New York City, ISEE Test Prep in Washington DC, GMAT Test Prep in Philadelphia, GMAT Test Prep in Washington DC

DMCA Complaint

If you believe that content available by means of the Website (as defined in our Terms of Service) infringes one or more of your copyrights, please notify us by providing a written notice (“Infringement Notice”) containing the information described below to the designated agent listed below. If Varsity Tutors takes action in response to an Infringement Notice, it will make a good faith attempt to contact the party that made such content available by means of the most recent email address, if any, provided by such party to Varsity Tutors.

Your Infringement Notice may be forwarded to the party that made the content available or to third parties such as ChillingEffects.org.

Please be advised that you will be liable for damages (including costs and attorneys’ fees) if you materially misrepresent that a product or activity is infringing your copyrights. Thus, if you are not sure content located on or linked-to by the Website infringes your copyright, you should consider first contacting an attorney.

Please follow these steps to file a notice:

You must include the following:

A physical or electronic signature of the copyright owner or a person authorized to act on their behalf; An identification of the copyright claimed to have been infringed; A description of the nature and exact location of the content that you claim to infringe your copyright, in \ sufficient detail to permit Varsity Tutors to find and positively identify that content; for example we require a link to the specific question (not just the name of the question) that contains the content and a description of which specific portion of the question – an image, a link, the text, etc – your complaint refers to; Your name, address, telephone number and email address; and A statement by you: (a) that you believe in good faith that the use of the content that you claim to infringe your copyright is not authorized by law, or by the copyright owner or such owner’s agent; (b) that all of the information contained in your Infringement Notice is accurate, and (c) under penalty of perjury, that you are either the copyright owner or a person authorized to act on their behalf.

Send your complaint to our designated agent at:

Charles Cohn Varsity Tutors LLC
101 S. Hanley Rd, Suite 300
St. Louis, MO 63105

Or fill out the form below:

Do not fill in this field

Contact Information

* Full legal name

Company name

* Phone number

* Email address

Address

* Address1

Address2

* City

* State

* Zipcode

* Country

Complaint Details

* URL of copyrighted work (where your original material is located)

* Please describe the copyrighted work so that it may be easily identified

I am the owner, or an agent authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.

I have a good faith belief that the use of the material in the manner complained of is not authorized by the copyright owner, its agent, or the law.

This notification is accurate.

I acknowledge that there may be adverse legal consequences for making false or bad faith allegations of copyright infringement by using this process.

* Signature (your digital signature is legally binding)

HIGH SCHOOL

GRADUATE SCHOOL

K-8

Search 50+ Tests

math tutoring

science tutoring

foreign languages

elementary tutoring

other

Search 350+ Subjects

College Chemistry : Acid-Base Reactions

Study concepts, example questions & explanations for College Chemistry

All College Chemistry Resources

Example Questions

Example Question #1 : Acid Base Reactions

Example Question #2 : Acid Base Reactions

Example Question #1 : Acid Base Reactions

Example Question #1 : Buffers

Example Question #1 : Acid Base Reactions

Example Question #3 : Acid Base Reactions

Example Question #4 : Acid Base Reactions

Example Question #1 : Titrations

Example Question #2 : Titrations

Example Question #1 : Titrations

All College Chemistry Resources

Report an issue with this question

DMCA Complaint

Contact Information

Address

Complaint Details

Email address:
Your name:
Feedback: