### All MCAT Physical Resources

## Example Questions

### Example Question #1 : Translational Motion

A 200-gram object moves in the +x direction at 4m/s and collides with an identical object moving in the –y direction at 3m/s. If the two objects stick together after the collision, what is the magnitude of their resulting velocity?

**Possible Answers:**

2.5m/s

5m/s

3.5m/s

7m/s

6.5m/s

**Correct answer:**

2.5m/s

Use conservation of momentum in each direction: and

The initial momentum in the x direction is provided only by the first object.

This also equals the final x-momentum, when the two objects move together at the same velocity.

The initial momentum in the y direction is provided only by the second object.

Again, this equals the final y-momentum.

Combine the two velocities using the Pythagorean theorem.

### Example Question #1 : Newtonian Mechanics And Motion

Two children are playing with sleds on a snow-covered hill. Sam weighs 50kg, and his sled weighs 10kg. Sally weighs 40kg, and her sled weighs 12kg. When they arrive, they climb up the hill using boots. Halfway up the 50-meter hill, Sally slips and rolls back down to the bottom. Sam continues climbing, and eventually Sally joins him at the top.

They then decide to sled down the hill, but disagree about who will go first.

Scenario 1:

Sam goes down the hill first, claiming that he will reach a higher velocity. If Sally had gone first, Sam says they could collide.

Scenario 2:

Sally goes down the hill first, claiming that she will experience lower friction and thus reach a higher velocity. If Sam had gone first, Sally says they could collide.

Scenario 3:

Unable to agree, Sam and Sally tether themselves with a rope and go down together.

If the hill is frictionless, what momentum does Sam experience when he reaches the bottom of the 50m hill on his sled in Scenario 1?

**Possible Answers:**

1340kg*m/s

1898kg*m/s

60kg*m/s

1581kg*m/s

0kg*m/s

**Correct answer:**

1898kg*m/s

The momentum is equal to Sam's total mass times his velocity. His velocity can be found from his potential energy, using conservation of energy. Keep in mind, his total mass includes the mass of his sled.

PE = mgh = (50kg + 10kg) * 10m/s^{2} * 50m

PE = 30,000J

KE = 30,000J = 1/2mv^{2} = 1/2(60kg)(v^{2})

v^{2} = 1000 m^{2}/s^{2} = 31.2m/s

p = mv = 60 kg * 31.2 m/s = 1898 kg*m/s

If you had used 30J in place of 30kJ in the KE calculation, you would have chosen 60kg*m/s

### Example Question #1 : Translational Motion

Two children are playing with sleds on a snow-covered hill. Sam weighs 50kg, and his sled weighs 10kg. Sally weighs 40kg, and her sled weighs 12kg. When they arrive, they climb up the hill using boots. Halfway up the 50-meter hill, Sally slips and rolls back down to the bottom. Sam continues climbing, and eventually Sally joins him at the top.

They then decide to sled down the hill, but disagree about who will go first.

Scenario 1:

Sam goes down the hill first, claiming that he will reach a higher velocity. If Sally had gone first, Sam says they could collide.

Scenario 2:

Sally goes down the hill first, claiming that she will experience lower friction and thus reach a higher velocity. If Sam had gone first, Sally says they could collide.

Scenario 3:

Unable to agree, Sam and Sally tether themselves with a rope and go down together.

A third boy, John, comes to play on a neighboring hill. Sally goes to play with him, and they find that after they sled down the first hill, Sally was traveling 12m/s. John was only moving at 8m/s. John weighs 80kg with his sled. Which of the following is true?

**Possible Answers:**

Sall has greater momentum, John has greater kinetic energy

Sally has lower momentum, John has lower kinetic energy

Sally has greater momentum, John has lower kinetic energy

Sally has greater momentum, while they have roughly equal kinetic energies

Sally has lower momentum, John has greater kinetic energy

**Correct answer:**

Sally has lower momentum, John has lower kinetic energy

Kinetic energy emphasizes velocity, by squaring the velocity term.

KE = 1/2mv^{2}

Sally's KE = 1/2(52 kg)(12 m/s)^{2} = 3,744J

John's KE = 1/2(80 kg)(8m/s)^{2} = 2,560J

p = mv

Sally's Momentum = 52kg * 12m/s = 624 kg*m/s

John's Momentum = 80kg * 8m/s = 640 kg*m/s

### Example Question #1 : Newtonian Mechanics And Motion

Two astronauts, Ann and Bob, conduct a collision experiment in a weightless, frictionless environment. Initially Ann moves to the right with a momentum of , and Bob is initially at rest. In the collision, the two astronauts push on each other so that Ann's final momentum is to the left. What is Bob's final momentum?

**Possible Answers:**

to the left

to the left

to the right

to the right

to the right

**Correct answer:**

to the right

Apply conservation of momentum before and after the collision.

.

Taking left to be the negative direction, and noting that Bob's initial momentum is 0 since he is at rest, we can use the provided information to see that .

Solving for , we get . Since this answer is positive, Bob's momentum is in the positive direction (to the right).

### Example Question #1 : Newtonian Mechanics And Motion

In a totally inelastic collision between two objects, all of the following are true, except that __________.

**Possible Answers:**

energy is conserved

kinetic energy is conserved

momentum is conserved

the two objects stick together

**Correct answer:**

kinetic energy is conserved

The difference between an elastic and inelastic collision is that in an elastic collision BOTH momentum and kinetic energy are conserved. Momentum is conserved in any collision, but when a collision is inelastic, kinetic energy is dissipated when the two individual objects combine. This energy can be in the form of heat, explosion, sound, etc. In a *totally* inelastic collision, the two objects colliding stick together and travel with the same velocity in one direction.

Overall energy is conserved, as the energy is merely transferred from a kinetic form to a non-kinetic form.

### Example Question #48 : Mcat Physical Sciences

Which object has the most momentum?

I. A ball thrown at

II. A bird diving at

III. An book sliding across a desk at

**Possible Answers:**

II

II and III are equal

I

III

I, II, and III are equal

**Correct answer:**

III

We can find the momentum for each object using the momentum formula, .

### Example Question #1 : Translational Motion

Two cars collide in a head-on collision. Afterward, they move together with a net momentum eastward. Which of the following collisions could produce this result?

**Possible Answers:**

A car travels eastward at , and hits a traveling westward at

A car travels westward at , and hits a traveling eastward at

A car travels eastward at , and hits a traveling westward at

A car travels westward at , and hits a traveling westward at

A car travels eastward at , and hits a traveling westward at

**Correct answer:**

A car travels eastward at , and hits a traveling westward at

The momentum formula is . We know that momentum is conserved during the collision, and that the final momentum must be eastward; thus, the initial net momentum must also be eastward, since momentum is a vector. Only one answer choice gives an eastward (positive) momentum.

Answer possibilities:

### Example Question #1 : Momentum

A billiard ball moving at to the right hits a bowling ball at rest. The billiard ball then moves in the opposite direction at .

What is the velocity of the bowling ball after the collision?

**Possible Answers:**

**Correct answer:**

We can set this up as a conservation of momentum problem. The sum of the initial momentum for each object must equal the sum of the final momentum of each object.

We have two objects and four different velocities. The system must conserve momentum between the time before the collision and after the collision. We are given the mass of each object and their initial velocities.

We are given the magnitude of the billiard ball's final velocity, and told that it changes directions, thus becoming negative. Remember that both velocity and momentum are vector quantities.

Finally, we can solve of the final velocity of the bowling ball. We can predict that the bowling ball's velocity will be positive since the net initial velocity is positive, and the final billiard ball velocity is negative. The bowling ball must compensate for the negative momentum of the billiard ball.

### Example Question #1 : Translational Motion

A force is applied to a ball, changing its velocity from to . For how long was this force applied in order to cause this change in velocity?

**Possible Answers:**

**Correct answer:**

The best way to solve this problem is to use the impulse, or change in momentum. Impulse can be calculate from either of two equations:

We can set these equations equal, and use the given values for mass and velocity to calculate the impulse.

We are given the applied force, allowing us to solve for the time.

### Example Question #4 : Translational Motion

In which of the following collisions is momentum not conserved?

**Possible Answers:**

A bullet is shot at a moving target and becomes embedded upon impact

A football player tackles another football player travelling in the opposite direction

A star explodes and releases material in several different directions

Two cars travelling in perpendicular directions crash and slide along the asphalt in one piece

All of the collisions describe situations in which momentum is conserved

**Correct answer:**

All of the collisions describe situations in which momentum is conserved

Momentum is conserved in both elastic and inelastic collisions. During an elastic collision, kinetic energy is also conserved and the two objects remain separate after impact. During an inelastic collision, kinetic energy is lost to the surroundings and the objects traditionally stick together upon impact. The energy lost in an inelastic collision is generally transformed into heat or sound.

The only time momentum will not be conserved is when an outside force is introduced or the masses of objects do not remain constant.

Certified Tutor